Threading the Cam Buckle
1. Firmly grasp the metal D-ring with your
left hand (Fig. 10).
2. While firmly holding the metal D-ring,
rotate buckle back towards the webbing.
The buckle should form an angle with the
metal D-ring (Fig. 11).
3. Insert band through the metal D-ring,
then through the middle slot of the buckle
(Fig. 12).
4. Insert band through the inside slot of the
buckle (Fig. 13).
NOTE: Threading steps are imprinted
on the plastic cam buckle.
11
Fig. 10
Fig. 11
Fig. 12
Fig. 13