13
BD BUOYANCY COMPENSATOR USER'S MANUAL
threADiNg the CAM BUCkLe
Your BC ships from the factory with the cylinder band already threaded, but
in the event it becomes unthreaded, please follow the directions below:
1. Firmly grasp the metal D-ring with your
left hand
.
2. While firmly holding the metal D-ring,
top VieW
rotate the back towards the webbing. The
buckle should form an angle with the metal
D-ring as shown in the top view.
3. Insert band through the metal D-ring, then
through the middle slot of the buckle.