Aqua Lung BC1760101UV User Manual page 10

10
3. The procedure for weaving the cylinder band through the cam buckle is covered
in Threading the Cam-Buckle section of this manual.
4. Open the cylinder band buckles and loosen the bands.
5. Slide the cylinder band over the cylinder
so the soft pack is at the desired position in
relation to the cylinder valve. Make sure the
cylinder valve air outlet is facing the back
of the soft pack (Fig. 9).
6. The procedure for securing the cylinder band to the cylinder is covered in
Securing the Band to the Cylinder section of this manual.
7. Assemble the regulator first stage to the cylinder valve. The procedure for
connecting the MP inflator hose to the regulator is covered in the Attaching the
MP Inflator Hose section of this manual.
NOTE: When using the BC with a rear mount cylinder set up, a standard
SCUBA regulator configuration must be used.
8. Connect the MP inflator hose and secure it in place using the hook and loop
attachment (Fig. 5e). The procedure for connecting the MP inflator hose is covered
in the Inflation Methods section of this manual.
Fig. 9