Table of Contents
Advertisement
8
3. The procedure for weaving the cylinder band through the cam buckle is covered
in Threading the Cam-Buckle section of this manual.
4. Open the cylinder band buckles and
loosen the bands.
5. Insert the cylinder into the bands from
the right side. Position the cylinder so that
the valve on/off handle is pointed down
towards the diver's feet (Fig. 4).
6. The procedure for securing the cylinder
band to the cylinder is covered in Securing
the Band to the Cylinder section of this
manual.
7. Assemble the regulator first stage to the cylinder valve. Make sure the first stage
faces towards the diver (Fig. 5a). The procedure for connecting the MP inflator
hose to the regulator is covered in the Attaching the MP Inflator Hose section of
this manual.
8. Route the MP hose through the three hook and loop attachments (Fig. 5b-d).
9. Connect the MP inflator hose and secure it in place using the hook and loop
attachment (Fig. 5e). The procedure for connecting the MP inflator hose is covered
in the Inflation Methods section of this manual.
E
Fig. 5
Fig. 4
D
C
B
A
Advertisement
Table of Contents
