Gas Shock Replacement - Fast UT3P25 Owner's Manual

Gas Shock Replacement

The gas shocks between the wing sections
are designed to limit movement of the wing
section when folded or unfolded.
When folding or unfolding a flip wing section,
you should feel the gas shock pull or snap
the section into place. The flip wing section
should be stable in the field or transport
position. If not, replace the gas shock.
When unfolding or folding the main wing
section, you should feel resistance, and the
wing should be stable in the field position. If
the main wing wobbles, breaks position
easily, or slams hard into position, it may be
necessary to replace the gas shock.
To replace a gas shock:
1. Remove the nut holding the shock to
the frame.
2. Repeat on other end of the shock.
3. Install new gas shock and replace the
nut.
4. Test operation.
Figure 18: Gas shock rod-end mounting
LUBRICATION & MAINTENANCE Utility Sprayer 25' / 30' / 40' / 45'
LUBRICATION & MAINTENANCE
Figure 19: Gas shock base-end mounting
Page 86