Transporting; Following Safe Transport Procedures; Cau琀椀On For All Machines - Fast UT3P25 Owner's Manual

TRANSPORTING

Following Safe
Procedures
A. Lights
B. SMV Emblem
C. Reflector Tape
D. Reflectors
CAUTION: When transporting the
machine on a road or highway at night
or during the day, use warning lights
and devices for adequate warning to
operators of other vehicles.
IMPORTANT: Transport Sprayer only
with tank EMPTY to prevent Sprayer
damage.
Check local governmental regulations.
Various safety devices are available from
your Fast Ag Solutions dealer. Keep safety
items in good condition. Replace missing or
damaged items.
Upward force on hitch may cause instability
when transporting. Add BALLAST to tractor
as required.
BEWARE of overhead wires and narrow
gates. KNOW the transport height and width
of your machine. (See
& Specifications.)
Travel at a reasonable and safe speed;
REDUCE speed over rough or uneven
terrain, slopes, and when turning. See
Observe Maximum Transport
TRANSPORTING
Transport
Machine Dimensions
Speed.
Utility Sprayer 25' / 30' / 40' / 45'
TRANSPORTING
BE SURE SMV emblem, reflectors, and
warning lights are clean, visible, and in good
condition.
BE SURE your safety chain has a strength
rating greater than the gross weight of the
machine.
Caution for All Machines
CAUTION: When transporting the
machine on a smooth surface road, do
not exceed the maximum transport
speed of 32 km/h (20 MPH). Reduce
speed considerably when traveling
over rough ground.
Reduce speed when turning. Do not
uncouple tractor brake pedals and apply
individually in an attempt to make a tighter
turn.
WARNING: Prevent serious injury or
death. The machine coming near or
contacting power lines can cause
electrocution. Electrocution
occur without contact. Fully lower
wings before moving or transporting.
Serious injury or death can result from
contact with electric lines. Use care when
moving or operating this machine near
electric lines to avoid contact. Know
transport height and width of machine.
Check local regulations before transporting.
(See Machine Dimensions & Specifications
for transport height and width of machine.)
can
Page 54