Table of Contents
Advertisement
Breakaway Clutch Tension
Measure from the bottom of the plate to the
bottom
of
the
washer. The
measurement is 3-5/8" (9.2 cm).
To adjust breakaway clutch tension:
1. Loosen the jam nut.
2. Adjust the nut below the spring.
a. Tighten to increase pressure.
b. Loosen to decrease pressure.
3. Tighten jam nut to secure.
4. Check boom leveling after adjusting
breakaway clutch tension.
BOOM HEIGHT ADJUSTMENT Utility Sprayer 25' / 30' / 40' / 45'
BOOM HEIGHT ADJUSTMENT
standard
Page 72
Advertisement
Table of Contents
