Pre-Opera琀椀On Checklist - Fast UT3P25 Owner's Manual

Pre-Operation Checklist
Efficient and safe operation of the machine
requires that each Operator reads and
understands operating procedures and all
related safety precautions outlined in this
section. A pre-operational
provided for the Operator. It is important for
both personal safety and maintaining the
good mechanical condition of the Sprayer
that this checklist be followed.
Before operating the Sprayer, complete the
following items:
1. Lubricate
schedule
LUBRICATION
MAINTENANCE
2. Use only a tractor of adequate
power and weight to operate the
Sprayer.
SPECIFICATIONS
recommendations.
3. Gather and apply all required
PPE before filling, operating, or
servicing the machine.
4. As per the Intended Use, be sure
that the tractor's operator station
is enclosed and pressurized.
5. Read and
Operator's Manual and all safety
signs on the equipment.
6. Read and
chemical
information.
7. Confirm this Manual, any SDS
sheets used for chemicals, and
emergency contact information
are on-board the machine.
8. Know and follow all state, federal,
and local regulations for use,
handling, and transport of this
equipment and chemicals.
9. Inspect all hydraulic lines, hoses,
fittings, and
tightness.
Hardware
recommendations.
PREPARING THE MACHINE
checklist is
machine per the
outlined in the
and
section.
See the
section for
understand the
understand the
manufacturer's
couplers for
See Tightening
for break-in period
Utility Sprayer 25' / 30' / 40' / 45'
PREPARING THE MACHINE
10. Check the condition and routing
of all fluid hoses and lines. Be
sure that all lines are routed in
large arcs. Replace any that are
damaged. Re-route those that
are rubbed, pinched, or crimped.
See Replace Hydraulic
11. Check placement components.
Remove and replace any that are
worn.
12. Remove all entangled material.
Replace any plugged nozzles or
tubes.
13. Check the weather conditions.
Use the machine only when the
potential for chemical drift is
minimal.
Hoses.
Page 46