Introduction - Fast UT3P25 Owner's Manual

INTRODUCTION

Read this Manual carefully
before operating your FAST
equipment. The information
presented will prepare you
to safely operate and service
your machine.
All Operators are required to read this
Manual carefully and be acquainted with all
the operating and adjustment procedures
before attempting to operate. Failure to
follow the information in this Manual and on
decals may result in personal injury or
equipment damage.
This Manual should be considered a
permanent part of this equipment and should
remain with the equipment when you sell it.
Replacement manuals can be obtained from
your Fast Ag Solutions dealer.
This equipment has been engineered and
manufactured to provide dependable and
satisfactory use. Like
products, it will require cleaning and upkeep.
Inspect your equipment before putting it into
service. Your authorized Fast Ag Solutions
dealer has trained mechanics, genuine FAST
service parts, and the necessary tools and
equipment when service is needed. Use only
genuine FAST parts for service or repairs.
Substitute parts will void the warranty and
may not meet standards for safe and
satisfactory operation.
Warranty is provided as part of Fast Ag
Solutions' support program for customers
who operate and maintain their equipment as
described in this Manual. The warranty is
explained on the warranty certificate you
should have received from your dealer. This
warranty provides you with the assurance
that Fast Ag Solutions will back its products
where defects appear within the warranty
period. Should the equipment be abused or
modified to change its performance beyond
the original factory
warranty will become void.
INTRODUCTION
all mechanical
specifications, the
Utility Sprayer 25' / 30' / 40' / 45'
INTRODUCTION
These instructions have been compiled from
field experience and engineering data. Some
information may be general in nature due to
unknown and varying operating conditions.
However, through experience and these
instructions, you should be able to develop
procedures suitable
situation.
The illustrations and data used in this Manual
were current at the time of printing. However,
due to possible in-line production changes,
your machine may vary slightly in detail. We
reserve the right to redesign and change the
machines as necessary without notification.
Figure 1: Orientation is viewed from behind the
machine
to your particular
Page 18