Boom Maintenance and Service
Nozzles
Clean nozzles weekly, before changing
chemicals and before calibrating.
Single Spray Nozzle
1. Remove nozzle housing and remove
nozzle tip.
2. Clean nozzle tip with clean water.
3. Reinstall nozzle tip.
4. Install nozzle housing and hand
tighten.
Wing Bumpers
1. Inspect all wing bumpers for wear
and damage.
2. Replace bumpers when they become
worn or damaged.
a. Remove both bolts.
b. Remove
bumper.
c. Install the new bumper.
d. Replace and tighten the bolts.
LUBRICATION & MAINTENANCE Utility Sprayer 25' / 30' / 40' / 45'
LUBRICATION & MAINTENANCE
the
damaged
Boom Clamps
Tighten hose clamps and wet boom clamps
monthly.
Page 85