Substances - KTM 350 SX-F 2018 Owner's Manual

22

SUBSTANCES

Brake fluid DOT 4 / DOT 5.1
Standard/classification
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standard (see specifications on the container) and that exhibits the corre-
sponding properties.
Recommended supplier
Castrol
–
REACT PERFORMANCE DOT 4
Motorex ®
–
Brake Fluid DOT 5.1
Coolant
Guideline
–
Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade and unsuitable
antifreeze causes corrosion, deposits and frothing.
–
Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion protection and lubrication
properties.
–
Only use coolant that complies with the requirements stated (see specifications on the container) and that has the relevant proper-
ties.
Antifreeze protection to at least
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant needs to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility) with other coolants.
Recommended supplier
Motorex ®
–
COOLANT M3.0
Engine oil (SAE 10W/60) (00062010035)
Standard/classification
–
JASO T903 MA ( p. 112)
–
SAE ( p. 112) (SAE 10W/60)
–
KTM LC4 2007+
Guideline
–
Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties.
Synthetic engine oil
Recommended supplier
Motorex ®
–
Cross Power 4T
Engine oil (SAE 10W/50)
Standard/classification
–
JASO T903 MA ( p. 112)
–
SAE ( p. 112) (SAE 10W/50)
Guideline
–
Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties.
Synthetic engine oil
Recommended supplier
Motorex ®
–
Cross Power 4T
−25 °C (−13 °F)
108