Preparing For Rides On Dry Sand; Preparing For Rides On Wet Sand - KTM 350 SX-F 2018 Owner's Manual

7 PREPARING FOR USE
–
Check the electrical connector for humidity and corrosion and to ensure it is firmly seated.
» If humidity, corrosion, or damage is found:
–
Clean and dry the connector, or change it if necessary.
Difficult riding conditions are:
–
Rides on dry sand. (
–
Rides on wet sand. (
–
Rides on wet and muddy surfaces. (
–
Rides at high temperature and slow speed. (
–
Riding at low temperature and in snow. (
7.5

Preparing for rides on dry sand

7.6

Preparing for rides on wet sand

p. 20)
p. 20)
p. 21)
p. 21)
p. 21)
–
Fit a dust cover on the air filter.
Dust cover for air filter (79006920000)
102136-01
–
Fit a sand cover on the air filter.
Sand cover for air filter (79006922000)
102138-01
–
Clean the chain.
Chain cleaner (
–
Fit the steel sprocket.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
600868-01
–
Fit a rain cover on the air filter.
Waterproofing device for air filter (79006921000)
102137-01
Info
See the KTM PowerParts fitting instructions.
Info
See the KTM PowerParts fitting instructions.
p. 110)
Tip
Do not grease the chain.
Info
See the KTM PowerParts fitting instructions.
20