Additional Safety Instructions For Sabre Saws - Parkside 326401-1904 Translation Of The Original Instructions

GB IE
method on a stable under-
ground. If you hold the work-
piece only with your hand or
against your own body, it will
stay instable and this can lead
to a loss of control.
• Do not use any accessories
that are not recommended
by PARKSIDE. This can result
in electric shock or fire.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and charg-
er from the Parkside
X 20 V Team series. A
detailed description of
the charging process
and further information
can be found in the sep-
arate operating instruc-
tions.
Additional safety
instructions for sabre saws
• Keep hands away from the
sawing area. Do not reach un-
derneath the workpiece. Upon
contact with the blade there is a
risk of injury.
• Move the power tool against the
workpiece only when it is turned
32
on. Otherwise, there is a risk of
kickback if the attachment tools
jam in the workpiece.
• Make sure that the footplate is
secure during sawing. A tilted
saw blade may break or cause
a kickback.
• After you have finished work,
turn the power tool off and do
not pull the saw blade out of the
cut until it has come to a stand-
still. In this way you will avoid
any kickback and can safely put
down the power tool.
• Use only undamaged saw
blades in perfect condition.
Bent or blunt blades can break,
adversely affect the cut or cause
kickback.
• Do not brake the saw blade
after switching the device off by
applying side pressure. The saw
blade may be damaged, break
or cause a kickback.
• Use suitable detectors in order
to find hidden supply lines or
consult the local utility company.
Contact with electric cables can
lead to fire and electric shock.
Damage to a gas pipe can
cause an explosion. Penetration
into a water line causes prop-
erty damage.
• Secure the workpiece. A work-
piece that is retained with
clamping appliances or a vice