Table of Contents
Advertisement
2.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust flickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose "Screen" in the Setting menu, and press
3. Choose "Analog Adjustment" in the "Screen" menu, and press
4. Choose "Auto Screen Adjust" in the "Analog Adjustment" menu, and press
5. Select "Yes" with
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing the auto adjustment, perform adjustments
according to the following procedure. If the screen is displayed correctly, go to
(page
23).
3.
Choose "Screen" from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars
Procedure
1. Choose "Analog Adjustment" in the "Screen" menu, and press
2. Choose "Clock" in the "Analog Adjustment" menu, and press
The "Clock" menu appears.
3. Adjust the clock with
Press
or
slowly so as not to miss the adjustment point.
4. Press
to exit.
When blurring, flickering or bars appear on the screen after adjustment, proceed to "To remove flickering or
blurring ".
or
, and press
.
or
to eliminate vertical bars.
.
.
"4. Adjusting color gradation."
.
.
Chapter 2 Adjusting Screens
.
21
Advertisement
Table of Contents
