Screen Adjustment; Digital Signal Input; Analog Signal Input - Eizo FlexScan EV2430 User Manual

2-4. Screen Adjustment

●

Digital Signal Input

When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if
characters and / or lines appear blurred, go to
When performing more advanced adjustment, see
●

Analog Signal Input

Attention
• It takes about 30 minutes for the monitor display to stabilize. Please wait 30 minutes or more after the monitor power
has been turned on, and then adjust the monitor.
• The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of 800 × 600
(SVGA).
• The self adjustment (or automatic screen adjustment) function works correctly when an image is fully displayed over the
Windows or Macintosh display area. They do not work properly in the cases below:
- When an image is displayed only on a part of the screen (command prompt window, for example)
- When a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
The monitor screen adjustment is used to suppress flickering of the screen or adjust screen position and screen
size correctly according to the PC to be used.
Note
• The Self Adjust function works when all of the following conditions are satisfied:
- When a signal is input into the monitor for the first time or when a resolution or vertical / horizontal scan frequency
not used before is set
If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
Setting Procedures
1.
Adjust flickering, screen position, and size automatically.
Procedure
1. Choose "Screen" in the Setting menu, and press
2. Choose "Analog Adjustment" in the "Screen" menu, and press
3. Choose "Auto Screen Adjust" in the "Analog Adjustment" menu, and press
4. Select "Yes" with
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing the auto adjustment, perform adjustments
according to the following procedure. If the screen is displayed correctly, go to
(page 21).
"To modify blurred characters / lines" (page
or , and press .
"2-3. Adjusting Color" (page 14)
.
.
21).
and subsequent pages.
.
"3. Adjusting color gradation."
Chapter 2 Adjusting Screens
19