Table of Contents
Advertisement
●
To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight
(Light source from the LCD back panel).
Adjustable range: 0 to 100
(1) Choose [Color] in the Setting menu and press
(2) Choose [Brightness] in the [Color] menu and press
The [Brightness] adjustment menu appears.
(3) Adjust the brightness with t or u , and then press
The adjustment is completed.
●
To adjust the black level [Black Level]
The black of images is adjusted.
Red, green, and blue (RGB) consisted of the color are adjusted respectively for
PC input or HDMI (PC signal) input. RGB is adjusted together for VIDEO
input or HDMI (video signal) input.
Adjustable range: 0 to 100
(1) Choose [Color] in the Setting menu and press
(2) Choose [Black Level] in the [Color] menu and press
The [Black Level] adjustment menu appears.
(3) Adjust the black level with t or u , and then press
The adjustment is completed.
●
To adjust the contrast [Contrast]
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range: 0 to 100
(1) Choose [Color] in the Setting menu and press
(2) Choose [Contrast] in the [Color] menu and press
The [Contrast] adjustment menu appears.
(3) Adjust the contrast with t or u , and then press
The adjustment is completed.
●
To adjust the color saturation [Saturation]
This function allows you to adjust the saturation of the color on the monitor.
Adjustable range: -50 to 50
(1) Choose [Color] in the Setting menu and press
(2) Choose [Saturation] in the [Color] menu and press
The [Saturation] adjustment menu appears.
(3) Adjust the saturation of the color with t or u , and then press
The adjustment is completed.
8
Chapter 3 Settings and Adjustments
.
.
.
.
.
.
.
.
.
.
.
.
NOTE
NOTE
• You cannot adjust the value if the
• You cannot adjust the value if the
function is not displayed, depending
function is not displayed, depending
on the color mode selected. (See
on the color mode selected. (See
"Adjustment items in each mode" on
"Adjustment items in each mode" on
page
page
27.)
27.)
• When setting "50" for all colors in PC
• When setting "50" for all colors in PC
input or HDMI (PC signal) input, the
input or HDMI (PC signal) input, the
status is changed to "Standard" mode.
status is changed to "Standard" mode.
NOTE
NOTE
• You cannot adjust the value if the
• You cannot adjust the value if the
function is not displayed, depending
function is not displayed, depending
on the color mode selected. (See
on the color mode selected. (See
"Adjustment items in each mode" on
"Adjustment items in each mode" on
page
page
27.)
27.)
• In the contrast of 50, every color
• In the contrast of 50, every color
gradation is displayed (PC input
gradation is displayed (PC input
only).
only).
• When adjusting the monitor, it
• When adjusting the monitor, it
is recommended to perform the
is recommended to perform the
brightness adjustment which may
brightness adjustment which may
not lose the gradation characteristics,
not lose the gradation characteristics,
prior to the contrast adjustment.
prior to the contrast adjustment.
Perform the contrast adjustment in the
Perform the contrast adjustment in the
following cases.
following cases.
– When you feel the image is dark
– When you feel the image is dark
even if the brightness is set to 100.
even if the brightness is set to 100.
(Set the contrast to higher than 50).
(Set the contrast to higher than 50).
– When you feel the image is bright
– When you feel the image is bright
even if the brightness is set to 0. (Set
even if the brightness is set to 0. (Set
the contrast to lower than 50).
the contrast to lower than 50).
Attention
Attention
• This function does not enable to
• This function does not enable to
display every color gradation.
display every color gradation.
Advertisement
Table of Contents
