Advertisement
ETC Installation Guide
Dual Tech Wall-mount Occupancy Sensor
Prepare for Installation
Echo Dual Tech Wall-mount Occupancy Sensors ship with electronics, a
decorator style wall plate, and a termination kit. The sensor may be
installed into an industry-standard back box (provided by others) or
surface-mounted back box (sold separately and available from ETC).
Compliance
• cULus Listed
• CE compliant
For use with ETC Echo Control Systems, powered by an Echo station
power supply.
Environment
Ambient
For indoor, commercial controls use only. Operating temperature
0°C–40°C (32°F–104°F), humidity maximum 90% (non-condensing).
Location
ETC recommends paying special attention to the installation
environment:
• When operating in PIR only modes, the sensor must have an
unobstructed view of the room. Do not mount behind or near tall
cabinets, shelves, hanging light fixtures, etc.
• Do not install the sensor within eight feet from an HVAC airflow
duct/vent.
• Install the sensor where it cannot easily sense movement in areas
outside of the intended space, such as hallways, glass partitions, or
adjacent rooms.
Note:
may allow for better detection results. See
7.
Dual Tech Wall-mount Occupancy Sensor
In areas of increased noise activity, enabling PIR only mode
DIP Switches on page
Page 2 of 12
ETC
Advertisement
