Advertisement
ETC Installation Guide
Dual Tech Wall-mount Occupancy Sensor
Settings
The Echo Dual Tech Wall-mount Occupancy
Sensor participates in an Echo control system
using the configured Space and Address,
which are selectable using the rotary
switches on the sensor electronics located
behind the removable cover.
DIP switches and the [MODE] button, also
located on the sensor electronics, set the
sensor functionality and the occupancy
detection action when set to Basic
configuration mode. See
Note:
mode, DIP switch 2 set to On, all other DIP switch and Mode
button settings are ignored.
Set Space and Address
Two rotary switches on the sensor electronics provide for Space and
Address assignment for the sensor. By default, these switches are set to
Space 1, Address 1. Commands are shared by all devices within a given
space.
1. Set the Space rotary switch to the desired number (1 through 16)
for the space you want the sensor to control.
2. Set the Address rotary switch to desired address (1 through 16) for
the sensor identification in the selected space.
Note:
Dual Tech Wall-mount Occupancy Sensor
Configuration on page 8
When the sensor is placed into Custom configuration
Do not duplicate a device Address within the same Space.
.
Page 6 of 12
MODE
AUX
ETC
Advertisement
