Table of Contents
Advertisement
Service – Displacement Pump
Removal and Replacement
Thoroughly flush the system with a solvent which is
compatible to the fluid being pumped, then follow the
Pressure Relief Procedure on page 21. The Flushing
procedure is on page 17.
Stop the pump at the bottom of its stroke.
CAUTION
If you are changing to a different type of fluid, com-
pletely clean all of the equipment and hoses, making
sure that no fluid remains in any part of the system.
Remove the fluid outlet hoses from the displacement
pumps.
1. For Two Displacement Pump Models Only
Unscrew the swivel unions (33) from the bottom of
the displacement pumps. See Fig. 20.
2. For Three Displacement Pump Models Only
Unscrew the swivel union (33) from the bottom of
the center displacement pump. Unscrew the swivel
unions (126) from the outer displacement pumps.
Remove the supply manifold (125) from the outer
pumps. Unscrew the straight union (39) from the
center displacement pump. See Fig. 21.
24
308224
33
Fig. 20
41
39
Fig. 21
33
125
126
33
Advertisement
Table of Contents
