Table of Contents
Advertisement
Operation
IP Address
To set the IP address:
1. Go to the Ethernet Setting main level.
2. Select the IP Address option.
3. Select the first value of the IP address, from 2, 10, or 239.
4. Press <ENTER> to cycle through the 4 values of the IP address.
5. Set the other 3 values from 000–255.
6. Press <MENU> to exit when the IP address is set as desired.
Ethernet to DMX
When Ethernet to DMX is active, the selected universe of the Art-Net™ or sACN signal will be converted to
DMX and output through the 5-pin DMX out port.
1. Go to the Ethernet Setting main level.
2. Select the Ethernet To DMX option.
3. Select from No (do not convert) or Yes (convert).
Control Channel Assignments and Values
XYE = Extended (10 channels), XYB = Basic (6 channels)
XYE
XYB
Function
1
1
Dimmer
2
2
Fine dimmer
3
3
X coordinate
4
4
Fine X coordinate
5
5
Y coordinate
6
6
Fine Y coordinate
7
–
Strobe
8
–
Effect macros
9
–
Effect macro speed
10
–
Control
onAir IP Panel 1 User Manual Rev. 3
Value
Percent/Setting
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 010 No function
011 255 Strobe, slow to fast
000 010 No function
011 039 Color chase
040 068 Police car
069 096 Firetruck
097 125 Fire
126 154 Clouds
155 182 Fireworks
183 211 Paparazzi
212 240 Lightning
241 255 No function
000 255 Speed, slow to fast
000 255 See the
Control Chart
17
Advertisement
Table of Contents
