Setup
Adjustable Yoke
The Ovation Rêve E-3 IP comes with an adjustable yoke for mounting in low-clearance areas. To modify
the height of the yoke, do the following:
1.
Loosen the bracket adjustment knobs on both sides of the fixture.
2.
On each side of the fixture, remove the two screws and loosen the bolt attaching the plate to the
mounting bracket.
3.
Using the screw holes as guide, adjust the position of the mounting bracket to achieve the desired
height of the yoke.
4.
Put the screws back in place, and tighten the bolts and the bracket adjustment knobs.
Ovation Rêve E-3 IP User Manual Rev. 5
3
1
2
11