Changing The Chemicals - Miele PTD 701 Operating Instructions Manual

| |
English 8 Cleaning and maintenance
Priming the dosing devices
The dosing device must be primed if air has entered the dosing hose. This occurs if the canister is not replaced in time.
Item Description
1 Rinse aid dosing device
2 Detergent dosing device
Ø
Press button 1 or 2.
ð The button turns white.
ð The dosing device is primed.
Ø
As soon as the button goes off again, exit the menu.
8.5

Changing the chemicals

Crystallisation can occur as a result of mixing different chemical products, which can damage the dosing device.
The dosing device and the dosing hoses must therefore be flushed with water before a new chemical product is used.
For machines with integrated storage tanks
Ø
Have chemicals replaced by an authorised service technician.
For machines with external canisters and suction tubes
Ø
Remove the suction tube from the canister and place it in a water-filled container.
Ø
Rinse the dosing device with water via the "Priming" menu.
Item Name
1 Rinse aid dosing device
2 Detergent dosing device
Ø
Press button 1 or 2.
ð The button turns white, and the dosing device is activated.
ð The dosing hoses and the dosing device are rinsed out with water.
Ø
As soon as the button goes off, insert the suction tube into the new canister.
Ø
Press button 1 or 2 again.
ð The button turns white, and the dosing device is activated.
ð The water in the dosing hoses and dosing device is replaced by the new chemical product.
The dosing must also be reset.
Ø
Use an authorised service technician to continue to attain good wash results.
72
1
2
1
2
| |
11208020/04; 2023-07 Operating instructions