Connecting Suction Tubes And External Dosing Devices - Miele PTD 701 Operating Instructions Manual

| |
English 5 Commissioning
Mains connection with delta circuits (230 V)
1 1
Item Voltage
1 Tank heating element connection
2 230 V
3 230 V
5.3

Connecting suction tubes and external dosing devices

1
Item Description
1 Entries for hoses and cables
2 Connection for detergent dosing hose
3 Connection for rinse aid dosing hose
4 Plug for detergent suction tube with empty indicator
5 Plug for rinse aid suction tube with empty indicator
6 Connection for rinse aid dosing hose
Ø
Disconnect the warewasher from the electrical mains supply and secure against unintended activation.
Ø
Remove the front cover from the warewasher.
Ø
Remove partition wall to the electrical installation area.
Ø
Lead the dosing hose and the connection cable through at the intended point on the back of the warewasher chassis (1).
Ø
Fasten the detergent dosing hose to detergent connection (2) with wire hose clip.
Ø
Fasten the rinse aid dosing hose to the rinse aid connection (3 / 6) with a wire hose clip.
Ø
Connect the connection cable of the suction tube on the plug (4 / 5).
Ø
Ensure that the dosing hose and connection cable are guided kink-free.
Ø
Install the partition wall to the electrical installation area.
60
1
1
2
3~ PE
2~ PE
2
|
11208020/04; 2023-07
3
Parameter (P545)
0
1
1
3 4 5
Note
Rear view
Front view
PTD 702, 703, 704
White plug
Blue plug
PTD 701, rear view
|
Fuse (A)
25
20
16
6
Operating instructions