Table of Contents
Advertisement
The messages appear in dia
and a NO button to respond to the messages.
Cannot display position higher
than latitude of display limit.
Card 1/Card 2 malfunction.
Restore usable data?
Card 1/Card 2 malfunction.
Unit will be powered on again.
on again.
"lined the card fully.
ie
obstructions.
When the position update rate is set to Interval,
When the position update rate is set to Interval,
13, 72
press the GPS key to change the rate to
Continuous (the light turns green); or change
the setting of the position update rate to
Continuous in the Position Setting menu. Then
press the MARK key. The MARK key will be
turned on and the current position will be
stored.
Appendix B
81
Advertisement
Table of Contents
