Table of Contents
Advertisement
'If the memory is full
Memory Device option in the System
means that you will not be able to save the zone until additional memory is made
Setting menu.
available. To make more memory available for the zone, first check the unit's
memory by choosing System Information from the menu. Then either delete any
unneeded data (points, routes, etc.) from memory, or move data from the unit's
memory to an IC card's memory. To delete data from the unit, see "Deleting Points"
on page 32, "Deleting Routes" on page 40, "Deleting Tracks" on page 52, and
"Releasing Zones" on page 55. For more information on using |[C memory cards,
see "Using !C Memory Cards" on page 62.
Displaying Zones
To display specified zones:
1
Press the F4 key (ZONE).
2
Choose DISPLAY from the Zone menu.
The zone is displayed.
If you do not want to display zones, choose OFF in step 3.
To cancel displaying zones, press the F1 key (QUIT).
54
Getting Started with the Unit
Advertisement
Table of Contents
