Checking The Delivery Package - Siemens SIMATIC IPC RW-545A Operating Instructions Manual

Unpacking and installing the device
3.1 Unpacking the device
Installed software
You will find the information on more software for your device under: Software accessories
(Page 35).
Printed documents
• Quick Install Guide for the device with link and QR code to the online form for quality
control (quality control notification) in the SIEMENS After Sales Information System (ASIS)
• Product Information "Important notes on your device"
3.1.2

Checking the delivery package

Electric shock and fire hazard due to damaged device
Improper storage or shipping can damage equipment. This may result in personal injury
and/or property damage.
You must follow the instructions under "Safety instructions on transport and storage
(Page 40)".
Procedure
1. Check the delivery unit for any signs of visible transport damage.
If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
2. Unpack the device at its installation location.
3. Keep the original packaging in case you have to transport the unit again.
4. Check the scope of delivery (Page 51) and any accessories (Page 32) you may have ordered
for completeness and damage.
If the contents of the package are incomplete, damaged or do not correspond to your
order, you can use the After Sales Information System (ASIS)
(http://www.siemens.com/asis) to provide feedback on product deliveries and repairs.
Complete the online form for quality control (quality control notification).
5. Please keep the documentation in a safe place. It is required for initial commissioning and is
part of the device.
6. Note down the Device identification data (Page 53).
52
WARNING
Workstation SIMATIC IPC RW-545A Operating
Instructions, 08/2023, A5E52943278-AA