Table of Contents
Advertisement
Device maintenance and repair
8.5 Configuring firmware/BIOS
4. Download the ISO file appropriate for your device locally.
5. Follow the instructions to create a bootable USB flash drive. For instructions on how to do
this, see "Important instructions and manuals for operating the device (Page 11)".
Installing software and drivers from the bootable USB flash drive
1. In the firmware settings, set the device to boot from the USB flash drive at the next startup.
2. You can find information on this in the user manual for the motherboard. See "Important
instructions and manuals for operating the device (Page 11)".
3. Insert the provided USB stick into the device.
4. Run the file "START_DocuAndDrivers.CMD".
The "Documentation and Drivers" suite opens.
5. Install the required components.
8.5
Configuring firmware/BIOS
You can find information on the configuration of the firmware settings in the user manual
(UM) for the motherboard, see "Important instructions and manuals for operating the device
(Page 11)".
Note
Assign a BIOS password
Assign a "User Password" in the "Security" menu immediately after opening the BIOS-Setup.
You can find information on this in the user manual for the motherboard.
Note
If your device no longer boots, for example, after operating system crash during a firmware
update, contact your local SIEMENS contact person.
8.6
Recycling and disposal
The devices described in these operating instructions can be recycled thanks to their low level
of pollutants. Contact a certified disposal service company for electronic scrap for
environmentally sound recycling and disposal of your old device, and dispose of it according
to the relevant regulations in your country.
140
Workstation SIMATIC IPC RW-545A Operating
Instructions, 08/2023, A5E52943278-AA
Advertisement
Table of Contents
