Table of Contents
Advertisement
Safety instructions
2.1
General safety instructions
Danger if work is performed incorrectly
The installer of the system is responsible for the safety of a system in which the device
is integrated.
There is a risk of malfunction if work on the device is carried out incorrectly, if the device is
faulty, or if it is integrated incorrectly into a system.
Death or serious bodily injury can result.
• Make sure that only appropriately qualified personnel work on the device or on a system.
Danger to life when the control cabinet is open
Electrocution risk when control cabinet is open
When you open the control cabinet, there may be a dangerous voltage at certain areas or
components.
Touching these areas or components can cause death or serious physical injury.
• Disconnect the control cabinet from the power supply before opening it.
• Ensure that the power to the control cabinet cannot be turned on accidentally.
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA
WARNING
WARNING
2
37
Advertisement
Table of Contents
