Notice - Yamaha TransAcoustic TA3 Owner's Manual

CAUTION
Always follow the basic precautions listed below to
avoid the possibility of physical injury to you or others,
or damage to the product or other property. These
precautions include, but are not limited to, the
following:
Location
• Before placing or moving the piano, consult with a specialist
experienced in handling pianos. Pianos are extremely heavy,
so one must be careful to avoid back injury or scratching the
floor when moving it. Before moving the piano, remove all
connected cables to prevent damage to the cables or injury to
anyone who might trip over them.
Connections
• Before connecting the product to other electronic
components, turn off the power for all components. Before
turning the power on or off for all components, set all volume
levels to minimum.
• Be sure to set the volumes of all components at their
minimum levels and gradually raise the volume controls
while playing the product to set the desired listening level.
Handling
• Do not use excessive force on the buttons, switches or
connectors.
• Keep small parts out of the reach of infants. Your children
may accidentally swallow them.
• Do not use the product or headphones for a long period of
time at a high or uncomfortable volume level, since this can
cause permanent hearing loss. If you experience any hearing
loss or ringing in the ears, consult a physician.
• Remove the power plug from the AC outlet before cleaning
the unit. Failure to observe this may cause electric shocks.
Yamaha cannot be held responsible for damage caused by
improper use or modifications to the product, or data that is
lost or destroyed.
Always turn the power off when the product is not in use.
Even when the [P] (Standby/On) switch is in standby status
(power lamp is off), electricity is still flowing to the product at
the minimum level.
When you are not using the product for a long time, make sure
you unplug the power cord from the wall AC outlet.

NOTICE

To avoid the possibility of malfunction/ damage to the product,
damage to data, or damage to other property, follow the notices
below.
 Handling
• Do not connect this product to a public Wi-Fi and/or Internet
service directly. Only connect this product to the Internet
through a router with strong password protections. Consult
your router manufacturer for information on optimum
security practices.
• Do not use the instrument in the vicinity of a TV, radio, stereo
equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise.
• When you use the instrument along with an app on your
smart device, such as a smartphone or tablet, we recommend
that you enable "Airplane Mode" on the device to avoid noise
caused by communication. When wirelessly connecting a
smart device with this product, make sure that the Wi-Fi or
Bluetooth® setting on the device is turned on.
• Do not expose the instrument to excessive dust or vibrations,
or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of
disfiguration, damage to the internal components or unstable
operation.
 Maintenance
• When cleaning the instrument, use a soft and dry/slightly
damp cloth. Do not use paint thinners, solvents, alcohol,
cleaning fluids, or chemical-impregnated wiping cloths.
 Saving data
• Some of the data of this product (page 54) are retained when
the power is turned off. However, the saved data may be lost
due to some failure, an operation mistake, etc. Save your
important data onto USB flash drive/an external device such
as a computer (pages 34, 63).
• To protect against data loss through USB flash drive damage,
we recommend that you save your important data onto spare
USB flash drive or an external device such as a computer as
backup data.
(DMI-10)
TA3 SH3 SC3 Owner's Manual
7