Listening To Audio Data Played By A Bluetooth-Equipped Device Through This Instrument (Bluetooth Audio Function) - Yamaha TransAcoustic TA3 Owner's Manual

Listening to audio data played by a Bluetooth-equipped device through
this instrument (Bluetooth Audio function)
This Bluetooth Audio function lets you listen to the audio data played on a Bluetooth-equipped device such as a smart
device (smartphone or tablet) or portable audio player through this instrument. In the Quiet mode (page 18), the sound
can be heard from the headphones, while in the TransAcoustic mode (page 20) or Layer mode (page 21), the sound is
output from the soundboard.
Before using the Bluetooth function, be sure to read "About Bluetooth" on page 8. Depending on the country in which you
purchased the product, the instrument may not have Bluetooth capability.
NOTE
In this manual, "Bluetooth-equipped device" refers to a device that can transmit audio data on it to the instrument using the Bluetooth
function, via wireless communication. For proper operation, the device must be compatible with A2DP (Advanced Audio Distribution
Profile). The Bluetooth Audio function is explained here by using a smart device as an example of such Bluetooth-equipped devices.
This instrument cannot transmit audio data to devices via Bluetooth. Thus, any Bluetooth headphones and Bluetooth speakers cannot be
connected.
1
Press the Menu button several times until the
[UTILITY] lamp lights up in orange.
2
Hold down Button 3 [Func.] for two seconds
to put pairing in standby.
The Bluetooth lamp will flash in blue and a "bt" message
will appear on the display.
NOTE
• "Pairing" means to register Bluetooth-equipped devices on this
instrument, and establish mutual recognition for wireless
communication between the two.
• The Bluetooth function of the instrument should be on (the Bluetooth lamp should light up in white) to start paring. It is set to on
by default. The Bluetooth function can be turned on/off in Function F7.5 (page 51). The Bluetooth lamp lights up when UTILITY
is selected and turns off when VOICE or SONG is selected.
• Only one Bluetooth-equipped device can be connected to this instrument at a time (although up to 8 Bluetooth-equipped
devices can be paired to this instrument). When pairing with the 9th Bluetooth-equipped device has succeeded, pairing data for
the device with the oldest connection date will be deleted.
• The pairing operation can also be done by Function F7.6 (page 52). After enabling pairing, go on to step 3 here.
• To cancel pairing, press Button 3 [Func.] while "bt" is shown in the display.
Bluetooth Audio
Bluetooth-equipped device
Lights up in orange
Hold down for Bluetooth lamp
two seconds flashes in blue
TA3 SH3 SC3 Owner's Manual
5
59