Table of Contents
Advertisement
8
When your performance is finished, press
Button 2 [Rec] or Button 3 [
Pause) to stop recording.
Dashes appear on the display in succession, indicating
that the recorded data is being saved. After the data is
saved, an "End" message appears, and the recorded Song
number appears. Pressing Button 3 [
NOTICE
While dashes appear on the display in succession, never turn off the power. Doing so may corrupt the data or damage
the internal memory or USB flash drive.
Recording the right-hand and left-hand parts independently (MIDI
recording)
With MIDI recording, you can record the right-hand part and left-hand part independently. For example, you can record
the right-hand part first, and then record the left-hand part while listening to the already recorded right-hand part. This
allows you to create a complex Song you might not otherwise be able to play with both hands.
1
Record the first part. Follow the "Basic procedure for recording" (steps 1–6 on page 29) to
put recording in standby.
In step 4, select the MIDI Song category (U.01–U.10 or S.00–S.99).
If you want to record a Rhythm, make sure to record it with the first part. The Rhythm part cannot be added
afterwards.
2
Hold down Button 1 [Select] for two seconds
to call up the recording part on the display.
3
Rotate the [VALUE] control to select the part
to record.
• r: For recording the right-hand part.
• L: For recording the left-hand part.
NOTE
• Selecting "Lr" lets you record both the right- and left-hand parts (with the same operation as in "Basic procedure for recording").
• To cancel recording standby status, press Button 2 [Rec] again.
4
Play the keyboard to start recording.
If you want to record an empty section at the start of the Song, press Button 3 [
recording. The [
/
R
K
recording.
NOTICE
If "FUL" appears on the display while or after recording, this indicates the internal memory or USB flash drive capacity
has become full and all or the part of the data will not be saved. We recommend that you first delete any unnecessary
User Songs (page 35) to ensure sufficient memory capacity.
/
] (Play/
R
K
/
] (Play/Pause) plays back the recorded Song.
R
K
] (Play/Pause) lamp lights, and the current measure number is shown on the display while
Or
Hold down for two seconds.
/
] (Play/Pause) to start
R
K
TA3 SH3 SC3 Owner's Manual
3
31
Advertisement
Table of Contents
