Initializing The Instrument (Clearing The Backup Data) - Yamaha TransAcoustic TA3 Owner's Manual

Initializing the instrument (Clearing the Backup data)

TA3 SH3 SC3
While holding down the highest key (C7), turn on the power by pressing the [
the display and the Backup data (see below) will be initialized. Note that the Character Code for Song files, Bluetooth
pairing information, and User Songs are not cleared.
NOTICE
While "CLr" is shown in the display, never turn off the power. Doing so may delete the User Song, or damage the internal
memory.
NOTE
If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, and then perform the initialization
procedure; this may remedy the situation.
Backup data
The following settings, referred to as Backup data, are automatically saved to the internal memory of this instrument.
The Backup data and the User Songs saved to the internal memory will be retained even if the power is turned off.
• Bluetooth on/off (Function F7.5)
• Auto Power Off setting (Function F8.1)
• Mode setting for grand pianos when the power is turned on (Function F8.5)
• Backup (Voice/Others) settings (Function F7.3–F7.4)
• Character code for Song files (page 37)
• Bluetooth pairing information (page 59)
• (Backed up only when the Function F7.3 is On) Voice settings
• (Backed up only when the Function F7.4 is On) Performance settings
54
TA3 SH3 SC3 Owner's Manual
Highest key (C7)
] (Standby/On) switch. "CLr" appears on
P
* See description of F7.3 for details
* See description of F7.4 for details