Page 1
Disc Grinder G 18SH2 G 23SF2 • G 18SR G 23SR • Handling Instructions G23SF2 Read through carefully and understand these instructions before use.
Page 2
G18SR G23SR • 15 – 30° G18SH2 G23SF2 • 22.5 mm 6.5 mm 8.5 mm G18SR G23SR • 17 mm 6 mm 7 mm...
Page 3
Brush cover Socket for side handle Push button (Spindle lock) Spindle Screw Wheel guard Wheel washer Depressed center wheel Wheel nut Wrench Diamond wheel Side handle Lock button Switch Wear limit No. of carbon brush Usual carbon brush Auto-stop carbon brush Spring Brush holder G18SR •...
Carrying power tools with your finger on the GENERAL POWER TOOL SAFETY WARNINGS switch or energising power tools that have the switch on invites accidents. WARNING d) Remove any adjusting key or wrench before Read all safety warnings and all instructions. turning the power tool on.
Fragments of workpiece or of a broken accessory SAFETY WARNINGS COMMON FOR may fly away and cause injury beyond immediate GRINDING, SANDING OR CUTTING-OFF area of operation. OPERATIONS j) Hold power tool by insulated gripping surfaces only, when performing an operation where the a) This power tool is intended to function as a grinder, cutting accessory may contact hidden wiring or its sander or cut-off tool.
d) Use special care when working corners, sharp edges Investigate and take corrective action to eliminate etc. Avoid bouncing and snagging the accessory. the cause of wheel binding. Corners, sharp edges or bouncing have a tendency d) Do not restart the cutting operation in the to snag the rotating accessory and cause loss of workpiece.
4. Switch operation 2. Inspecting the mounting screws Switch ON: Push the locking button forward and Regularly inspect all mounting screws and ensure then press the switch lever. that they are properly tightened. Should any of the * For continuous use, press the switch screws be loose, retighten them immediately.
Page 15
MODIFICATIONS Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements. Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice. NOTE Due to HITACHI’s continuing program of research and development, the specifications herein are subject to change without prior notice.
Page 20
Hitachi Koki Co., Ltd. Code No. C99107224 M Printed in Malaysia...