Sherwood RD-6504 Operating Instructions Manual page 40

RD-6504(G):RD-6504(G) 2009-02-12 오
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever
you want.
1.
After performing the steps 1 ~ 3 in "Adjusting the current channel level" procedure on page 39, press the
ENTER button.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired preset memory, then press the
ENTER button.
Recalling the memorized channel levels
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "MODE ~ ".
2.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired one of REF 1 and REF 2.
9:35 페이지 40
All manuals and user guides at all-guides.com
40
• Then "1" of "REF 1" indication flickers.
• Each time the CURSOR LEFT(◀) or RIGHT(▶) button
is pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized
into the selected memory.
• "CAL" may be displayed instead of "REF 1" or "REF 2".
• Then the channel levels memorized into the selected
preset memory are recalled.