Sherwood RD-6504 Operating Instructions Manual page 37

RD-6504(G):RD-6504(G) 2009-02-12 오
When selecting the DISTANCE
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DISTANCE, then press the ENTER button.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker.
3.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected speaker as desired.
4.
Repeat the above steps 2 and 3 until the distances are all set as desired.
■About the speaker distance
When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center and surround
speakers should be the same distance from the main listening position as the front speakers. By entering the distance between
the listening position and each speaker, the delay times of center and surround speakers are automatically adjusted to create an
ideal listening environment virtually as if the center and surround speakers were at their ideal locations respectively.
9:35 페이지 37
All manuals and user guides at all-guides.com
37
■Note :
• You cannot select the speakers set to "N (None )".
• You can set the distance within the range of 0.1 ~ 9.0
meters in 0.1 meter intervals.