Setting The System - Sherwood RD-6504 Operating Instructions Manual

RD-6504(G):RD-6504(G) 2009-02-12 오

SETTING THE SYSTEM

• SW (SUBWOOFER) : To select the desired subwoofer mode.
• TONE : To adjust the tone (bass and treble) as desired.
• HDMI : To output the digital audio signals from the HDMI MONITOR OUT connector.
• RETURN : To return to the previous menu.
1.
Press CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
2.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
When selecting the SUBWOOFER mode
• "SW ＋" mode is effective only when "FRONT" is set to "L" and "SUB- W" is set to "Y" on the SPK SET menu. (For details,
refer to "SETTING THE SPEAKER SETUP" on page 35.)
NORM : When the low frequency signals of channels set to "L" are reproduced from those channels only.
In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low frequency
signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects) channel, also called the
".1" channel) and the channels set to "S".
SW ＋: When the low frequency signals of channels set to "L" are reproduced simultaneously from those channels and the
subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending on the size and
shape of the room, interference may result in a decrease of the actual volume of the low frequency range.
9:35 페이지 32
All manuals and user guides at all-guides.com
32