Installation (continued)
4
Attaching the fixture body to the post
□
Coat the top 1 in. of the post with silicone sealant (not supplied)
and position the post fitter of the fixture body (A) onto the post.
□
Be sure to seat it completely, aligning the holes in the fitter with
the 1/16 in. pilot holes drilled into the post.
□
Secure using the mounting screws (AA).
5
Installing the light bulb
□
Install the correct bulb (not included) referring to fixture markings and/or labels for maximum wattage.
□
Reattach the fixture hood (2) to the fixture body (A)
□
Secure with the previously removed mounting screws (3).
NOTE: Use one 60W maximum medium base (E26) type "A"
or type "S" incandescent lamp or 9W maximum medium base
(E26) self-ballasted LED vintage Edison bulb (sold separately).
Mounting hole
6
A
AA
Post
2
3
A