Table of Contents
Advertisement
Digital Control Pellet Stoves
Service Guide
1. Turn the stove
off and make
sure the stove
is completely
shut down. After
the stove is
completely shut
down unplug the
stove from the
outlet.
2. Remove the left
hand side panel
of the stove. This
is the left side
when looking
at the stove.
Locate the
exhaust blower.
3. Locate the exhaust probe. Make sure it is mounted
securely in the bracket. Check the wires for any
damage. Make sure there is no ash on the probe.
Probe location
The exhaust prone is located under the exhaust blower.
It is mounted on the exhaust chamber pipe.
38
Back to Table of Contents
EXHAUST PROBE INFORMATION
PELPROSTOVES.COM
NOTE:
If the probe is loose from the bracket or dirty it can cause
the stove to not operate correctly. Also if there is ash build
up in the exhaust chamber it could also effect the way the
stove operates.
This should be done when ever you clean the exhaust
blower.
8390-017C • 10/23
Advertisement
Table of Contents
