Overall Installation - SolaX Power BMS Parallel Box-II G2 User Manual

Installation
4.5

Overall Installation

Depending on the connection with different battery systems, there are two parallel
options, with details as follows:
① Connect with T-BAT-SYS-HV-5.8
Connect with a T-BAT H 5.8 (BMS)
and a HV11550 battery module:
Inverter
Battery BMS+Battery
module 1 module 1
Connect with a T-BAT H 5.8 (BMS)
and 5 HV11550 battery modules:
Inverter
BMS+Battery
module 1
Battery
module 1
Battery
Battery
module 2
module 2
Battery
module 3
Battery
module 3
14
Connect with a T-BAT H 5.8 (BMS)
and 3 HV11550 battery modules:
Inverter
BMS+Battery
Battery module 1
module 1
Battery
module 2 Battery
module 2
Connect with a T-BAT H 5.8 (BMS)
and 7 HV11550 battery modules:
Inverter
Battery
BMS+Battery
module 1
module 1
Battery Battery
module 2
module 2
Battery
Battery
module 3
module 3
Battery Battery
module 4 module 4
② Connect with T-BAT-SYS-HV-3.0
Connect with a MC0600 (BMS)
inverter
BMS
Battery
Battery
module
module
2-1
1-1
Connect with a MC0600 (BMS) and 6 HV10230 battery modules:
Battery
module
2-1
Battery
Battery
module
module
2-3
2-2
*Wiring at the back
Connect with a MC0600 (BMS) and 8 HV10230 battery modules:
Battery
Battery
module
module
2-4
2-1
Battery
Battery
module
module
2-3
2-2
*Wiring at the back
CAUTION!
It is supported to only connect the slave battery modules.
It is not supported to only connect the master battery modules.
The number of modules connected at the master side and the slave side should
be consistent. At most four modules can be connected at one side.
Installation
Connect with a MC0600 (BMS)
and 4 HV10230 battery modules:
BMS
Battery
Battery
module
module
2-1
1-1
Battery
Battery
module
module
2-2
1-2
inverter
BMS
Battery
module
1-1
Battery
Battery
module
module
1-2 1-3
*Wiring at the back
inverter
BMS
Battery
Battery
module
module
1-1
1-4
Battery
Battery
module
module
1-2
1-3
*Wiring at the back
15