Yada ROADCAM AI PLUS BT533642 User Manual page 11

Attach the AI Dashcam onto the windshield:
2.
- Apply the electrostatic sticker onto the cleaned windshield and peel
off the protective film.
- Peel off the 3M VHB™ tape backer from the Dashcam Mount and
attach the Dashcam onto the center of the sticker.
Recommended
mounting position
NOTE: To optimize the accuracy of AI calibration, we recommend
placing the Dashcam at the center of your windshield, right behind
your rear view mirror.
3.
Route and hide the power cable in the headliner and pillars in your
vehicle. We recommend going through the passenger side so the cable
doesn't get into the driver's way.
Plug the cable
into the power
adapter then into
your 12/24V outlet
(cigarette lighter).
11