Maintenance Schedule; Maintenance Recommendations; After First Use; Lubrication Chart - Craftsman SNOWTHROWER 536.8884 Instructions Manual

CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
SCHEDULE
Fill in dates as
After Before As Every Every Each 3efore
first2 Each Neede¢ 10 25 Season 3torage!
you complete
Houra Use
Hours Hours
regular service
SERVICE
DATES
Check Engine Oil Level p_' p4
Change EngineOil _ i,J
Tighten all screws and nuts
Check TractionClutch Cable t'J _ P_
Adjustment(See cable Adj) p_ p/
Reptsca Spark P|ug _ If
Replace Drive Belts p_
Lubricate all pivot points pJ
Drain Fuel i_J
Check Auger Clutch Cable
Adjustment(See Cable AdD P_
LubricateDisc Ddve Plate Zerk _ t,J
GENERAL RECOMMENDATIONS LUBRICATION CHART
The warranty on this snow thrower does not
cover items that have been subjected to op
erator abuse or negligence. To receive full LubricateDisc Ddve Plate Zerk
value from the warranty, the operator must with a Hi Temp EP Moly Grease.
maintain the snow thrower as instructed in
this manual. The above chart is provided to
assist the operator in properly maintaining
the snow thrower.
Some adjustments will need to be made pe-
riodicafly to property maintain your snow
thrower.
AFTER FIRST USE
• Check the tracks for tension and adjust if
necessary (see first figure on page f 6).
• Check the track adjustment and fasteners
regularly.
• Be sure that all fasteners are tight.
AS REQUIRED _
The following adjustments should be
performed more than once each season.
• All screws and nuts should be checked
often to make sure they are tight, prefer-
able after each use.
• If any parts are worn or damaged, replace
immediately.
15