Table of Contents
Advertisement
The product has a default setting for
wide corridors. To further reduce the risk of
tracks forming, it is recommended to select as
wide corridor as possible. The
setting is not normally recommended, but in a
garden with one or many narrow passages, a
narrow corridor may be the only option. The
Narrow corridor setting increases the risk for
tracks forming along the guide.
3.9.3.2 Remote start 1
Remote start function is used to guide the
The
product to remote parts of the work area. If the
work area includes areas that are connected with
Remote start function is
narrow passages, the
useful to be able to maintain a well-cut lawn in all
parts of the yard. The product begins to mow
Remote start point. At all
when it reaches the
other times, the product leaves the charging
station in the standard manner and starts to mow.
To set the Remote start function
To get access to the menu
1.
Do steps 1–3 in
on page 22 .
2.
Use the multi-choice buttons to move
through the menu structure to select
Installation > Remote start > Proportion .
3.
Select how often the
shall be used. There are 5 options:
•
Never (0%)
•
Rarely (approx. 20%)
•
Medium (approx. 50%)
•
Often (approx. 80%)
•
Always (100%)
4.
Select the distance from the charging station
Remote start .
to the
1054 - 001 -
Medium
Narrow corridor
Remote start function
OK .
5.
Push
3.9.3.3 Remote start 2
If the work area contains 2 remote areas, the
guide wire should be installed so that it reaches
Remote start 1 and Remote start 2
both areas.
can then be combined to steer the product to
each area.
Proportion and Distance are
The settings for
carried out in the same way as for
1 . The factory setting is Never .
Proportion for Remote start 1
Note: The sum of
Remote start 2 cannot exceed 100%.
and
If you have for instance selected
Remote start 1 , then you can only select Never or
Rarely for Remote start 2 .
To measure the distance from the charging
station
1.
Put the product in the charging station.
To get access to the menu
2.
Do steps 1–3 in
on page 22 .
3.
Use the multi-choice buttons to move
through the menu structure
Remote start 1 or Remote start 2 >
Distance .
4.
Use the number buttons to set m as a
distance.
OK .
5.
Push
6.
Use the multi-choice buttons to move
through the menu structure
Test settings > Test OUT .
OK .
7.
Push
8.
Push the STOP button when the product is
at the distance you select to measure. The
distance shows in the display.
3.9.3.4 Test settings
Test settings menu, it is possible to test
In the
Remote start 1 and Remote
how the settings for
start 2 work in the work area in question.
To do a test of the Remote start function
1.
Put the product in the charging station.
To get access to the menu
2.
Do steps 1-3 in
on page 22 .
3.
Use the multi-choice buttons to move
through the menu structure
Remote start
Often for
Installation >
Installation >
Installation >
Installation - 23
Advertisement
Table of Contents
