Adjusting Swing-Away Display Holder - Invacare TDX SP2 Series User Manual

Invacare® TDX® SP2 Series
If your mobility device is fitted with a swing-away remote
holder, then the remote can be moved away to the side, for
example, to drive up close to a table.

5.4 Adjusting Swing-Away Display Holder

Adjusting Holder Height
• 3 mm Allen key
1. Loosen screws A.
2. Position holder to desired height.
3. Tighten screws.
Adjusting Holder Orientation
The holder can be turned through 360 degrees.
36
• 3 mm Allen key
1. Loosen screws A.
2. Adjust holder orientation.
3. Tighten screws.
Adjusting Display Orientation
The display can be turned through 360 degrees.
• 18 mm wrench
1578997-J