Adjusting The Trunk Supports; Adjusting The Width; Adjusting The Height; Adjusting The Depth - Invacare Fox User Manual

Invacare® Fox™
1. Loosen screws and clamping levers of dual link
adjustment assembly A and screws of upper and lower
rotational pivots B.
2. Set headrest to desired position.
3. Re-tighten screws and clamping levers.

5.11 Adjusting the trunk supports

5.11.1 Adjusting the width

50
1. Loosen the knobs A that hold the lateral supports.
2. Adjust the supports to the desired width.
3. Re-tighten the knobs.

5.11.2 Adjusting the height

• 5 mm Allen key
1. Loosen the screws A that allow height adjustment of
the lateral supports.
2. Adjust the supports to the desired height.
3. Re-tighten the screws.

5.11.3 Adjusting the depth

• 5 mm Allen key
1577074-F