7.
Move the rubber stop to the desired position.
8. Re-tighten the counternut.
9.
Move the legrest to the desired position.
10. Re-tighten the locking knob.
1578997-J
5.21.4 Adjusting the length of the legrest
CAUTION!
Risk of injury due to incorrect adjustment of the
footrests and legrests
– Before and during every journey it is imperative
to ensure that the legrests contact neither the
castor wheels nor the ground.
•
5 mm Allen key
1. Use the spanner to loosen the screw (1).
2. Adjust to the desired length.
3. Re-tighten the screw.
5.21.5 Adjusting the depth of the calf pad
The depth of the calf pad can be adjusted via the holding
plate. The holding plate hole combinations allow 5 different
depth settings.
Setup
79