Adjusting The Trunk Supports - Invacare Spectra Blitz User Manual

9.6

Adjusting the trunk supports

Installing
• Ensure the trunk support fixing screws (2) are loose.
• Slide the trunk support clamp (3) over the fixing tube (1)
and hold at the desired position.
• Tighten the trunk support fixing screws using a hex wrench.
Removal
• Loosen the trunk support fixing screws (2) using a hex
wrench and remove the trunk support assembly.
Adjusting
• The trunk support height can be adjusted by loosening the
fixing screws (2) and sliding the trunk support to the desired
location.
• To adjust the trunk support position laterally, remove the
upholstered pad which is fixed using hook and eye
fasteners.
• Loosen the clamping screws (4) using a hex wrench.
• Adjust to the desired position.
• Tighten the clamping screws using a hex wrench and
replace upholstered pad.
57