Work Mode - Ruijie Reyee RG-NIS Series Configuration Manual

Web-based Configuration Guide
(8) After the cables are connected, proceed as prompted, and wait for the device to reboot successfully.
Caution
To delete the hot standby configuration, ensure that the network cable connecting the hot standby interfaces is
disconnected. Failure to do so may result in a loop that can cause network disconnection.
1.4

Work Mode

The device supports two work modes: Standalone and Self-Organizing Network. It works in Self-Organizing
Network mode by default. The system presents different menu items based on the work mode. To modify the
work mode, see
Self-Organizing Network: After the self-organizing network discovery function is enabled, the device can be
discovered in the network and discover other devices in the network. Devices network with each other based on
the device status and synchronize global configuration. You can log in to the Web management page of the
device to check management information about all devices in the network. After self-organizing network
discovery is enabled, users can maintain and manage the current network more efficiently. You are advised to
keep this function enabled.
When the device is in self-organizing network mode, the Web page has two configuration modes: the network
mode and the local device mode. For more information, see Switching the Management Mode.
Standalone mode: If the self-organizing network discovery function is disabled, the device will not be
discovered in the network. After logging in to the Web page, you can configure and manage only the currently
logged in device. If only one device is configured or global configuration does not need to be synchronized to
the device, you can disable the self-organizing network discovery function.
Switching the Work Mode.
9
Login