Advertisement

Quick Links

This is the user's guide for the ADS42xx EVM (Revision B). The ADS42xx is a dual channel 12-bit/14-bit,
up to 250MSPS dual analog-to-digital converter family. This EVM is specifically suited for interfacing with
TI's TSW1200 EVM to capture and display waveforms from the ADC. The EVM schematic, BOM, and
layout files can be found in the design package in the ADS42xx EVM product folder on www.ti.com.
1
1.1
1.2
2
2.1
2.2
2.3
2.4
2.5
2.6
3
3.1
3.2
3.3
1
2
3
4
5
1
2
3
4
5
Windows is a registered trademark of Microsoft Corporation.
SLAU333 - March 2011
Submit Documentation Feedback
............................................................................................................
............................................................................................
................................................................................................
.......................................................................................................
................................................................................................
................................................................................................
..........................................................................................
.................................................................................
.........................................................................................
..................................................................................
....................................................................................................
......................................................................................
.............................................................................................
................................................................................................
...............................................................................................................
..............................................................................
© 2011, Texas Instruments Incorporated
Contents
..........................................................................
List of Figures
..................................................................
..........................................................................
List of Tables
......................................................
.......................................................
User's Guide
SLAU333 - March 2011
ADS42xx EVM
..........................................
................................
..................................
ADS42xx EVM
2
2
2
5
5
5
6
6
7
8
8
8
9
9
3
4
5
7
8
5
6
8
9
9
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADS42 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments ADS42 Series

  • Page 1: Table Of Contents

    Jumper Setting for Transformer-Coupled or CDC72010 Input ........Jumper/Component Setting for DDR LVDS Output and Parallel CMOS Output Windows is a registered trademark of Microsoft Corporation. SLAU333 – March 2011 ADS42xx EVM Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 2: Software Control

    High performance mode enable or disable. • High Freq Mode ChA: High frequency Mode enable for channel A. • High Freq Mode ChB: High frequency Mode enable for channel B. ADS42xx EVM SLAU333 – March 2011 Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 3: Ads58C28_Ads42Xx_Gui Front Panel - Top Level

    In addition, there is group of switches used for output offset functions, SNRBoost pin overwrite (for ADS58C28), and a group of LEDs used to designate a custom test pattern. SLAU333 – March 2011 ADS42xx EVM Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 4: Ads58C28_Ads42Xx_Gui - Advanced Level

    • Show USB Port: Allows user to change USB port configuration. Default setting is appropriate for the EVM RevB. • Exit: Stops the program ADS42xx EVM SLAU333 – March 2011 Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 5: Basic Test Procedure

    The EVM schematic shows default setting of JP8 to JP11 as parallel interface (Table 2) which is for EVM installation. After EVM tested and released these jumpers are set as serial interface (Table SLAU333 – March 2011 ADS42xx EVM Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 6: Test Set-Up Connections

    Press Ctrl-Shift-I to reset the software as needed • Verify status display in lower left has no errors • Press Capture button to initiate a data capture ADS42xx EVM SLAU333 – March 2011 Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 7: Ads42Xx Test Procedure

    – Use a high quality, low phase noise generator for this input to ensure proper device evaluation. • Initiate a capture by pressing the Capture button on the TSW1200 GUI. SLAU333 – March 2011 ADS42xx EVM Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 8: Ads42Xx Performance Results

    Do not install Do not install Install R114 Do not install Install SJP3 Shunt 2 3, default Shunt 1 2 SJP4 Shunt 2 3, default Shunt 1 2 ADS42xx EVM SLAU333 – March 2011 Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 9: On-Board Cdc72010 Clock

    JP26 Open Shunt JP27 Open Shunt The CMOS output data is output from the EVM board at 40-pin connectors J1 (ch A) and J2 (ch B). SLAU333 – March 2011 ADS42xx EVM Submit Documentation Feedback © 2011, Texas Instruments Incorporated...
  • Page 10 Evaluation Board/Kit Important Notice Texas Instruments (TI) provides the enclosed product(s) under the following conditions: This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards.
  • Page 11 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
  • Page 12 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments ADS4242EVM ADS4225EVM ADS4246EVM...

This manual is also suitable for:

Ads58c28 evm

Table of Contents