Table of Contents
Advertisement
First Time Setup—Continued
TV Format Setup (European and
Asian models)
For the onscreen setup menus to display properly, you
must specify the TV system used in your area.
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select "6. Miscella-
neous", and then press [ENTER].
The "Miscellaneous" menu appears.
3
Use the Up and Down [q]/[w] but-
tons to select "2. OSD Setup",
and then press [ENTER].
The "OSD Setup" menu appears.
4
Use the Up and Down [q]/[w] but-
tons to select "TV Format", and
then use the Left and Right
[e]/[r] buttons to select:
Auto: Select this to automatically
NTSC: Select if the TV system in
PAL: Select if the TV system in
54
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
6–2. OSD Setup
Immediate Display
On
Display Position
Bottom
TV Format
Auto
Language
English
detect the TV system from the
video input signals.
your area is NTSC.
your area is PAL.
5
When you've finished, press the
[SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV control-
ler by using its [SETUP] button, arrow buttons, and
[ENTER] button.
FM/AM Frequency Step Setup
For FM/AM tuning to work properly, you must specify
the FM/AM frequency step used in your area. Note that
when this setting is changed, all radio presets are
deleted.
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select "7. Hardware
Setup", and then press [ENTER].
The "Hardware Setup" menu appears.
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Network
6. Firmware Update
Advertisement
Table of Contents
