Table of Contents
Advertisement
Connecting the AV controller—Continued
Connecting a VCR or DVD Recorder for Recording
Step 1: Video Connection
Choose a video connection that matches your VCR or DVD recorder (
video source to be recorded must be connected to the AV controller via the same type of connection.
Step 2: Audio Connection
Make the audio connection
Connection
A
B
a
Notes:
• The AV controller must be turned on for recording. Recording is not possible while it's in Standby mode.
• If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV
controller, connect the TV/VCR's audio and video outputs directly to the recording VCR's audio and video inputs.
See the manuals supplied with your TV and VCR for details.
• Video signals connected to composite video inputs can only be recorded via composite video outputs. If your
TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output.
Similarly, video signals connected to S-Video inputs can only be recorded via S-Video outputs. If your TV/VCR is
connected to an S-Video input, the recording VCR must be connected to an S-Video output.
• Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded.
.
a
AV controller
VCR/DVR OUT S
VCR/DVR OUT V
VCR/DVR OUT L/R
L
VCR or DVD
recorder
or
), and then make the connection. The
A
B
Signal flow
⇒
⇒
⇒
a
R
AUDIO
S VIDEO
VIDEO
IN
IN
IN
VCR or DVD recorder
S-Video input
Composite video input
Analog audio L/R input
B
A
35
Advertisement
Table of Contents
